Most homes today have heating systems designed to keep the home at a comfortable temperature, no matter how cold it may be outside. Most of these systems are designed to last well over 20 years, provided they are properly maintained. Because of this, it is important for a homeowner to make sure their system is inspected and serviced by a professional from a company that handles maintenance on units for Heating in San Marcos on a regular basis.
One of the best times for a unit to be serviced can be in the early days of fall, prior to the start of the cold season. By doing this early in the season, a homeowner will be able to have plenty of time to handle any repair needed before the unit is used on a daily basis.
Most technicians from a repair company, such as Stillman Heating & Air Conditioning Inc., will want to spend some time cleaning the unit. Since the blower on the unit is often used by both the systems for cooling and Heating in San Marcos, most technicians will want to start work on this section of the system. The blower tends to collect the most dirt and other matter. This dirt can cause the system to clog and run much harder than it should. Overtime this can put a strain on the unit and cause it to have breakdowns as components wear out or break. By vacuuming the system regularly this type of issue can often be prevented.
The air filter on the blower section should also be inspected and replaced if necessary. Air filters are designed to trap as much dirt and debris as possible form entering into the ductwork of the home. This can help in keeping the air clean in the home. However, if the air filter is not changed on a regular basis, it can cause air to be blocked from moving through the system, as it should. This can sometimes cause the home to remain cold even while the heater is running. When this happens, energy usage can go up dramatically. By making sure, the filter is checked and changed whenever it is dirty, this can be avoided.
Finally, the burner should also be inspected to ensure it is heating properly. If the flames are flickering or orange and yellow in color, the burner should be cleaned as well.
