Books can be categorized into two broad groups: soft cover and hard cover. Hard covers typically utilize a Smyth sewn binding while soft covers are usually perfect bound. There are two generally utilized hard cover techniques -; dust jacket and casewrap. Novels typically possess a dust jacket, them gives them an attractive colorful impression on the book store shelf and the cover underneath will typically utilize gilt lettering on the spine of the book. Casewarp covers are glossy, full color and do not usually have jackets. This type of cover is commonly utilized on coffee table books. However, it is becoming more common in novels. Presented below are the standard bookbinding Chicago options.
Side stitch is a bookbinding method commonly used for low circulation documents or reports. This bookbinding option is inexpensive and commonly utilized by law firms as well as medium to large firms. This type of bookbinding Chicago cannot be opened or positioned flat and does not work for books that are thicker than half an inch. At times, an opening will be made on the left side and the pages held together using twine or some other decorative stitching. Saddle stitch is the preferred bookbinding Chicago option for small books. For books of extremely small size, it is hard to glue or bond the pages together.
Perfect binding is the commonest type of bookbinding used these days. The pages are clipped on all sides and then attached to the cover by means of glue. This is a low cost binding method and all types of books today utilize it. Notch binding is basically a modified perfect bookbinding Chicago. The paper is clipped on just three sides. Several notches are created on the untrimmed interior margin. At times twine is attached to the notches. If the book cover is glued to the pages, it produces an excellent bond which eliminates the issue of the pages beginning to fall off as can occur with normal perfect binding. You should opt for spiral binding if you want a book that can lie flat, such as a recipe book. The pages are clipped on all sides, and holes are created within the margin so that a plastic or metal can be used to hold the pages together.
