When you’re dealing with a broken PCB or printed circuit board, you know that in order to fix it you will not only need to have the skills, but also the tools. In this regard, by going for a high quality Circuit Board Repair Kit you’ll certainly be able to make ends meet and finally get your circuit board fixed and ready for action. However, there are also those complicated situations when you’ll need to use a good oscilloscope so that you’ll manage probing signals at various points. This will allow you to find problems with circuit components. After you’ll do so, then all you’ll be left with is to replace it. In fact, if you’ve heard of the term board level repair, it refers to replacing faulty components with good components.
First of all you’ll need to identify the component that is causing the problem and then get a hold of the required replacement part. In the majority of passive and also some active components (like it’s the case with voltage regulators), you’ll be able to use a similar component. However, there are also cases when the faulty component has a very specific functionality, case in which the replacement should be the exact same component.
To repair the PCB, you’ll have to place it on a flat surface and use tape to tape its sides so that it won’t move when you’ll start working on it. The faulty component should be removed with tweezers and then use the soldering iron to get the rest of the job done. Be very careful, because there are fine components you won’t want to mess with. By following these tips and using a great Circuit Board Repair Kit, you’ll never fail with your repairs, so good luck with that!